Let's get started with what's included in your M2 Upgrade Kit:

- (2) Stabilizing Bars

- (2) Support/Stop Blocks

- (1 ) M2 Base

Step 1: Remove the clamp portion of the jig from your original M1 base using the long hex key provided in your original packaging.

Step 2: Flip the jig over and remove the jig from the body. Unscrew all (4) screws located directly underneath the jig.
TIP: For easy removal and attachment, make sure your jig is set to 1/2''.

Step 3: Attach the clamp portion of the jig on to the new M2 base using the screws from step 1.

Step 4: Detach the adapter plate from the M1 and attach it on to the M2 base.

Step 5: Attach the jig on to the new M2 base using the screws from Step 2.

 

Step 6: Attach the stabilizing bars using the two front screws to release and tighten on your new M2 base.

Step 7: Add stop blocks to stabilizing bars.

You're all set to work on projects with your new and upgraded M2!