Let's get started with what's included in your M2 Upgrade Kit:
- (2) Stabilizing Bars
- (2) Support/Stop Blocks
- (1 ) M2 Base
Step 1: Remove the clamp portion of the jig from your original M1 base using the long hex key provided in your original packaging.
Step 2: Flip the jig over and remove the jig from the body. Unscrew all (4) screws located directly underneath the jig.
TIP: For easy removal and attachment, make sure your jig is set to 1/2''.
Step 3: Attach the clamp portion of the jig on to the new M2 base using the screws from step 1.
Step 4: Detach the adapter plate from the M1 and attach it on to the M2 base.
Step 5: Attach the jig on to the new M2 base using the screws from Step 2.
Step 6: Attach the stabilizing bars using the two front screws to release and tighten on your new M2 base.
Step 7: Add stop blocks to stabilizing bars.